Menu

Automotive Part
  • In the Plastics Business, we mainly manufacture, painting, assemble and deliver plastic molded parts for automobiles. They range from large to small parts, including such interior parts as door trims and quarter trims, and such exterior components as front bumpers and fenders. Those interior and exterior parts play important roles that affect the quality of automobiles, so reliable quality and delivery are requisites.For that reason, in the Vuteq Group, the headquarters‘ technical center cooperates with the AMERICA technical center from the production preparation stage of parts manufacturing, and as a result, we are highly regarded by our customers for efficient construction of the entire production processes, including part mold design,preparation of production equipment and ancillary equipment, and installation of inspection jigs that guarantee high quality products. In Thailand, we are also manufacturing raw materials for automobile interiors, this material are used in many car models as materials such as luggage sides.
3000 ton Injection Molding Machine
Automatic Painting Line (Electrostatic Paint)
Exterior Parts
  • We have large injection molding machnes, which can mold large plastic parts such as bumper and instrument panels, and autmatic painting line which can electrostatic painting. We have developed a complete manufacturing process from plastics molding until painting.

FR. BUMPER
SIDE MUD GUARD
FR. BUMPER
SIDE STEP
OVER FENDER
FENDER LINER
AIR SPOILER
Interior Parts
  • We respond to customer needs such as improvement of merchandise, weight reduction, and cost reduction by molding, decorating, and assembling with various production methods and materials.
DOOR TRIM / DOOR TRIM COMPONENT PARTS
INSTRUMENT PANEL / INSTRUMENT PANEL COMPONENT PARTS
QTR INNER LWR
Cover Lid Trunk Switch
Cover Hood Latch
COVER, SLIDE DOOR
Interior Material (FROS)

Design Advantage

1. Excellent texture of skin (nonwoven fabric / fabric) (low hair collapse)

2. Adapts will to deep drawn areas

3. Possibility of integrated hinges

4. Possibility of thinning (Min. 0.9mm~)

5. Nailing, Tacking and Sewing are possible

6. Products can be recycled


Performance Advantage

1. High stiffness (PP comparison 1.4 times)

2. Good heat resistance

3. High impact resistance

4. Low hygroscopicity, hygroscopic deformation


Cost, Manufacturing Advantage

1. Skin sticking adhesive is unnecessary

2. Good formability (low temperature 170℃, low pressure 4kg/cm2)

3. Simultaneous trimming with molding

4. Possibility of scrap materials

5. Possible to use recycled materials such as bumpers (painted parts)


Accessories part
  • We have an experience of genuine accessory parts for automotive and motorcycle of Japanese and Western countries. We propose process that meets the needs of customers, and supply competitive price and high quality. Since we support from development to mass production, we can respond from development to mass production in the shortest period of time.
Front Under Spoiler
Side Spoiler
Rear Under Spoiler
Export Steel Case
  • One of our main businesses, the steel fablicaion has various type of products, steel case, dolly, and jig etc. We produce by the integrated process of the products specification review, function test, drawing and mass production.
Robot Welding
Returnable Pallet Inspection & Repair Line
Steel Products
  • We provide high-quality, low-priced products that meet the needs of our customers and are adapted to the ever-changing environment.
ONE WAY STEEL CASE
RETURNABLE STEEL CASE
ENGINE PALLET (DOMESTIC & EXPORT)
SIDE GUARD
PRESS PARTS PALLET
FLIP UP CONTAINER
PALLET COMPRESSOR
ENGINE TRASFER DOLLY
CONVEYOR DOLLY
CONVEYOR LINE
Development
  • We design, develop and propose, provide optimal products that meet customer needs.
Assembly
  • Sub-assembly is an essential process for automobile production that consists of several tens of thousands of parts. Pre-assembled modular units enable immediate installation onto cars at an automaker’s assembly line. We assemble important functional parts such as knuckle disc brakes and intermediate shafts, tires and wheels. We provide sequential delivery of modular units to an automaker’s assembly line according to the various grades and specifications in the order that they are being built in.
Semi-Automatic Tire Assembly line
Sequential Delivery
AutoParts
  • In order to comply with various strict safety standards, we thoroughly check the quality and securely control the traceability of the production lots of the used parts.

Traceability System
  • Implementing a proprietary traceability system using barcodes
On-Site Business
  • Our On-Site business is conducted by undertaking specific processes for manufacturing, processing and providing parts to be performed in our customer's factory. This business was started for the purpose of responding to the customer's request, and now we are working for AGC in charge of processing and assembling of glass parts used in automobiles, liquid crystal displays, and houses, and for Toyota Motor in charge of supplying parts to production lines. In North America, we receive and sort parts supplied by suppliers and provide them to production lines. In addition, we are also in charge of assembling instrument panels, which is called a “brain of car”. Thus, as a proof of high reliability from the automaker, the Vuteq Group plays an integral role in their production activities. Our work in the customer's factory is not a simple task, but we are greatly contributing to the customer's productivity increase through realistic and lean management by streamlining the parts assembly and supply processes, as well as properly managing the information on work progress, stock status, etc. for optimization of the customer's production process.
Pre-Delivery Inspection Process (JAPAN)
Door Assy Process (TX, USA)
Export Packing
  • In the customer's factories, we operate KD packing by using our produced export palettes. Our operators achieve secure packing by preventing parts no., quantity mistakes within the allocated time.
Receiving Inspection
Rack-in Process
Picking Process
Quality Gate
Packing Process
Vanning Process
Vuteq Technical Center Thai
  • Development and Prototype Business :
  • Styling Design (Concept planning, Sketch, CG Rendering)
  • Engineering (Surface data, CAD modeling, Reverse engineering)
  • Prototype (High spec 3D printing technology SLA and SLA, Vacuum casting, CNC, Sand cast, FRP, Metal press, etc.
  • Design Model (Mockup, Show, Clay model, etc.)

  • Overseas Technical Center
    • The manufacturing technology of the Vuteq Group is supported by Technical Center, which has three major roles: "start-up support for new production", "advanced technology development" and "technical support". The “start-up support for new production" involves an important task, that is, preparation of all production processes before starting production of new products at domestic and overseas factories by installing necessary production equipment and designing efficient plant floor layout for increasing productivity and reducing cost. The “advanced technology development” mainly involves the development of recycled materials for automobile parts, with the strength, heat insulation performance, and weight reduction, as well as environmental friendliness taken into account. The “technical support” includes various tasks intended to improve productivity at factories in Japan and abroad.
    • In addition, the Technical Center provides engineer and designer trainings in cooperation with overseas technical support centers in order to improve the group's overall technical skills and product quality. In the case of production of new parts, it participates in the design stage for developing a product that is most suitable for the specifications requested by the customer, and conducts various tests and data analysis on prototypes, and makes a proposal on the overall production processes up to quality evaluation. Thus, the trust of the Vuteq brand has been established.
    Prototype Molding Machine
    • High quality products are produced with the leading-edge technology.
    Injection Molding Machine
    Vacuum Molding Machine
    3D printer to manufacture resin prototypes
    Environmental testing machine to test the durability of temperature change
    Durability Test
    CAD room to design various parts
    Data analysis of various tests
    Technical Center

    JAPAN TECHNICAL CENTER
    ESTABLISH: 1973
    TEAM MEMBERS: 49
    PLACE: Toyota, Aichi
    AMERICAS TECHNICAL CENTER
    ESTABLISH: 2014
    TEAM MEMBERS: 34
    PLACE: Woodstock, ONT

    DEVELOPMENT
    Research & Development
    Technology Review & Competitor Benchmarking
    - Sewing
    - Skin Pattern Development
    - Bladder Machine
    - Roll coating
    - Spray Booth

    DESIGN
    Research & Development
    Moldflow
    Draft Analysis

    TOOLING
    FDM 3D Print Prototyping
    Injection Machine
    Vacuum froming Machine

    EVALUATION
    DT Side impact test
    Weather chamber
    Instron machine
    Fogging chamber